f lash 370i? isr? programming kit CY3600I cypress semiconductor corporation 3901 north first street san jose ca 95134 408-943-2600 document #: 38-03041 rev. ** revised august 24, 2001 0i features ? supports f lash 370i? and ultra37000? devices (for ultra37000v 3.3v support, please see the ultra37000 isr? programming kit data sheet, cy3700i) jam programming language support for ultra37000 devices standard jtag programming interface multi-device programming supports cascading of devices easy to use windows 95?, windows 98?, and windows nt? 4.0 compatible interface eliminates programming insertion to improve manufacturing efficiency for programming in the lab, on the manufacturing floor, or at remote sites ate support via jam on industry leading ate platforms kit contents isr (in-system reprogrammable?) programming cable for use with f lash 370i and ultra37000 devices isr programming software release 2.2 isr application notes functional description the isr programming kit enables users to program f lash 370i and ultra37000 cplds on board with our isr programming kit, isr programming cable, and a personal computer. the isr programming cable connects to the parallel port of a pc into a standard 10-pin male connector mounted on the user ? s board. isr programming software the isr software provides an easy to use graphical user interface that accepts jedec files as input. the jedec files are used in isr programming for f lash 370i cplds. jedec files are also used to compose platform and device independent jam files. jam files are used in isr programming for ultra37000 cplds. the isr software reads in a simple user-defined configuration file that dictates how many devices are in the daisy chain and what operation is to be done on each cypress device. the same chain can be used with other jtag compliant devices. the isr user ? s guide (in the cd-rom documentation) describes the operation of the isr software. the application notes included with the kit describe the ultra37000 and f lash 370i architectures and system design considerations for programming with the f lash 370i isr programming kit. 10-pin isr connector the diagram below shows the pinout of the 10-pin male connector to be mounted onto the board. the view looking down onto the board is shown below. notes: 1. refer to the cd-rom isr user ? s guide documentation for detailed information on isr programming and electrical specification requirements. 2. pin1 connection. sdo vcc isr [1] isrvpp gnd [2] gnd nc sdi sclk smode isr pc cable programming v cc designer?s board parallel port 10 pin isr connector 25-pin cable pc 6 ? device f lash 370i ultra 37000 device 1 ? interface box
CY3600I document #: 38-03041 rev. ** page 2 of 3 ? cypress semiconductor corporation, 2001. the information contained herein is subject to change without notice. cypress semico nductor corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a cypress semiconductor product. nor does it convey or imply any license unde r patent or other rights. cypress semiconductor does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected t o result in significant injury to the user. the inclusion of cypress semiconductor products in life-support systems application implies that the manufacturer assumes all risk of such use and in do i ng so indemnifies cypress semiconductor against all charges. table 1 describes the function of each of these pins on the isr programming cable. an output is provided by the pc and an input is provided by the target system. the dimensions of the male connector required in the system are given below: male connector: 2 x 5 = 2 rows, 5 pins per row measuring from center of the pins, each pin is 0.1 ? from the others. pin length is 0.23 ? pin cross-section is 0.025 ? x 0.025 ? part number: digi-key ? s2012-05-nd (straight-pin connector) digi-key s2112-05-nd (right-angle connector) pc system requirements one free parallel port 486 / 66mhz pc or better windows 95/98/nt 16 mb of ram 1mb or more disk space ordering information isr, ultra37000, and f lash 370i are trademarks of cypress semiconductor corporation. windows 95, windows 98, and windows nt are trademarks of microsoft corporation. digi-key is a registered trademark of digi-key corporation. table 1. f lash 370i pin description. pin type description isrvpp output in system reprogramming high-voltage programming pin. isr* output in system reprogramming enable indicator (active low). vcc input +5v supply voltage provided from the target system to the cable. sdo input serial data output receiver. the sdo output pin of the last device in the isr chain of the system is connected to this input pin. smode output serial mode control. this is the mode select control input for the tap controller state machine contained in the isr interface. sclk output serial clock. isr interface clock input. sdi output serial data input driver. this output pin is connected to the sdi input of the first device in the isr chain. nc nc no connect. gnd ? zero volt common ground for pc and target system. product code description CY3600I isr programming kit
CY3600I document #: 38-03041 rev. ** page 3 of 3 document title: CY3600I flash370i ? programming kit document number: 38-03041 rev. ecn no. issue date orig. of change description of change ** 106566 09/15/01 szv change from spec number: 38-00733 to 38-03041
|
